The Sapphire Multi-Therapy Infusion Pump has the following features:
- Compact, lightweight device that is intuitive and easy to use
- Consistent accuracy with robust performance
- Single solution fits all, for any infusion need
- Software-driven and built-in adaptability
The following accessories are included with the purchase of the Eitan Medical Sapphire Multi-Therapy Infusion Pump:
- One (1) Eitan Medical Sapphire Infusion Pump
- One (1) Sapphire Infusion Pump Mini Cradle – 15042-000-0010
- One (1) Eitan Medical Sapphire AC Power Cord – 15070-112-0005
MME offers cases of the infusion sets for the Eitan Medical Sapphire Infusion Pump at the links below.
- Sapphire Infusion Pump Primary Infusion Set – 12000-000-0044
- Sapphire Pump Primary Infusion Set – 12005-000-0003
Additionally, the following accessories are available for purchase with the Sapphire Multi-Therapy Infusion Pump:
- Eitan Medical Sapphire Infusion Pump Communication Cable – 05020-110-0213
- Eitan Medical Sapphire Infusion Pump Travel Case – 15020-010-0002
- Eitan Medical Sapphire Infusion Pump Mini Cradle w/ Splitter – 17000-026-0007
- Eitan Medical Sapphire Infusion Pump USB to 4-Port RS232 Adapter – 15077-000-0001
- Eitan Medical Sapphire Infusion Pump Triple Mount – 17000-020-0008
- Eitan Medical Sapphire Infusion Pump External Battery – 15079-111-0001
- Eitan Medical Sapphire Infusion Pump Internal Battery – 050220-160-0001
If you need any repair or service for your , please visit the Renew Biomedical website here.
EPIDURAL KEY SPECIFICATIONS
Dimensions | 143 x 96 x 49 mm(5.63 x 3.78 x 1.93 in.) (H x W x D) |
Weight(excluding battery) | 418 g (14.7 oz.) |
Infusion device | Volumetric, peristaltic |
Pumping mechanism | Single-channel volumetric, with integral pressure sensor |
Infusion delivery modes | PCEA – Patient Controlled Epirdual Anelgasia & Epidural Intermittent |
KVO rate | Up to 20 mL/h in increments of 0.1 mL/h |
Accuracy | ±2.5% under normal conditions (per IEC60601-2-24 standard) |
Battery | Rechargeable Li-Ion battery 7.4V, 1960 mA/h, 24 hrs @ 125 mL/h (with a fully charged battery and backlight Off)
Recharge time: up to 6 hrs (when pump is not in operation) |
Flow rate | 0.1 – 99.9 mL/h in increments of 0.1 mL/h
100 – 999 mL/h in increments of 1 mL/h |
Volume (VTBI) | 0.1 – 9999 mL in increments of 0.1 mL |
External power supply | 100-240V 50-60 Hz, 0.6A |
Downstream occlusion | Up to 1.2 Bar (17.4 PSI or 900 mmHg) |
Air in line sensor | A sensor detects single and accumulated bubbles of selectable sizes varying from 0.02 mL – 0.5 mL |
Operating temperature | +5° (41ºF) to 40°C (104ºF) |
Water ingress and dust protection | IP24 according to IEC 60601-1-11 |
Prime | Manual or automatic priming (600 mL/h, or from air in line alarm 900 mL/h) |