Potential Use(s):
- Operating Rooms
- Ambulatory Vehicles
- Surgery and Induction Rooms
- PACU (Post Anesthesia Care Units)
- Monitor is intended for use for patients over 11 lbs/ three years of age
Datex Ohmeda Cardiocap 5 Specifications
Dimensions
- Size: (W x D x H) 330 x 220 x 300 mm, (13.0 x 8.7 x 11.8 in)
- Weight: F-MXG: < 11.2 kg, (24.8 lb), F-MX: < 10.2 kg, (22.6 lb
Power
- 100-240 VAC ±10%, 60/50 Hz
Back-up battery
- 15 min minimum, charging time typically 5h
Graphical trends
- 20 min, 1, 2, 4, 6, 8, 10, 12 and 24h
>Numerical trends
- All parameters, sampled every 5 min and after NIBP measurement
Alarms
- Adjustable high and low limit alarms
Recorder
- (optional) Thermal array, 3-channels, paper width 50 mm. Local printing PCL-5 and later compatible laser printers
>Screen
- Display size and type 10.4 inch LCD active matrix colorNumber of traces Up to 6. Display resolution 640 x 480 pixels
ECG
- Number of channels 3
- Number of leads 3 or 5
- ST analysis 3 channels, continuous
>Heart rate
- Measurement range 30 to 250 beats per min (bpm)
- Measurement accuracy ±5% or ±5 bpm, whichever is greater
- Pacemaker pulse detection 2 to 500 mV, 0.5 to 2 ms
Impedance Respiration
- Measurement method Measurement uses ECG electrodes to measure the impedance changes as a result of breathing. Measurement range 4 to 120 breaths/min
Pulse Oximetry (SpO2), Datex Legacy Standard
- Plethysmographic waveform/plethysmogram
- Measurement method Red and infrared light absorbtion SpO2
- Measurement range
- SpO2 40% to 100%
- Pulse rate 30 to 250 bpm
- Measurement accuracy, SpO2
- (±1SD) 100% to 80%, ±2 digits
- Below 50%, unspecified
- Pulse rate measurement accuracy ±5% or ±5 bpm
- Pulse Oximetry (SpO2), Datex Legacy Standard