Root Patient Monitor – Masimo – Factory Refurbished

Masimo Root Patient Monitor w/ NIBP Technical Specifications

Masimo Root Patient Monitor Root Specifications

• Mesurement Accuracy
  • NIBP
    • Between 0 mmhg and 300 mmHg: ±3 mmHg
  • Temperature
    • Between 80° F and 110° F (26.7° C and 43.3° C)
• Display Ranges
  • NIBP (Adult, Pediatric, Neonatal)
    • Systolic: 40–260 mmHg, 40–230 mmHg, 40–130 mmHg
    • Diastolic: 20–200 mmHg, 20–160 mmHg, 20–100 mmHg
    • MAP: 26–220 mmHg, 26–183 mmHg, 26–110 mmHg
  • Temperature
    • Temperature: 80-110° F (26.7-43.3° C)
• Electrical
  • Root AC Power Requirements: 100-240 VAC, 47-63 Hz
  • Power Consumption: 180 VA (Max)
  • Fuses Each With: 2 Amp, Fast Acting, Metric, (5×20 mm), 250 V
• Battery
  • Type: 10.8 V Lithium Ion (Nominal)
  • Capacity: 4 Hours
  • Maximum Charging Time: 4 Hours
• Environmental
  • Operating Temperature: 50º–104º F (10º–40º C)
  • Transport/Storage Temperature: -4º–122º F (-20º–50º C)
  • Operating Humidity: 15–95%, Non-Condensing
  • Storage Humidity: 15–95%, Non-Condensing
  • Operating Altitude: 500 mbar to 1060 mbar; -1,000–18,000 ft (-304–5486 m)
• Physical Characteristics
  • Weight: 7.42 lbs (3.37 kg)
  • Dimensions: 11″ x 10.5″ x 5.5″
• Display
  • Type: Backlit Active Matrix TFT LCD
  • Resolution: 1280 pixels x 800 pixels
  • Color: 24-bit RGB
  • Size: 10.1 in Diagonal
• Touchscreen
  • Type: Multi-Touch P-Cap
• Connections
  • Connector/Type (Number of Ports)
    • Ethernet: 10/100 MBps (1)
    • Nurse Call:1/4 -in Round Female (1)
    • MOC-9: Masimo Connector (3)
    • Iris: RJ-45 (4)
    • USB: USB 2.0 Type A (2)
    • NIBP: Male Quick Connect (1)
    • Temperature: Probe Connector (1)

Radical 7 Specifications

• Measurement Range
  • SpO2: 0 – 100%
• Oxygen saturation accuracy (%SpO2)
  • Saturation: 60 – 80%
    • No Motion
      • Adults/Infants/Pediatrics: + 3%
  • Saturation: 70 – 100%
    • No Motion
      • Adults/Infants/Pediatrics: + 2%
      • Neonates:+ 3%
  • Motion
    • Adults/Infants/Pediatrics/Neonates: + 3%
  • Low Perfusion
    • Adults/Infants/Pediatrics/Neonates:+ 2%

• Resolution
  • Oxyhemoglobin Saturation (%SpO2): 1%
  • Pulse Rate (bpm): 1 bpm
  • Respiration Rate (RRa): 1 breath per minute
• Electrical Standalone
  • AC power requirements: 100 – 240 VAC, 47 – 63 Hz
  • Power consumption: 55 VA
  • Fuses: 1 Amp, Fast Acting, Metric, (5x20mm), 250V
• Batteries
  • Type: NiMH
  • Capacity (battery life): 4 hours
  • Charging time: 3 hours
• Environmental
  • Operating Temperature: 41°F to 104°F (5°C to 40°C)
  • Storage Temperature: -40°F to 158°F (-40°C to + 70°C)
  • Operating humidity: 5% to 95%, noncondensing
  • Operating altitude: 500 mbar to 1060 mbar pressure; -1000 ft to 18,000 ft (-304 m to 5,486 m)
• Physical Characteristics
  • Dimensions: 8.9” x 3.5” x 2.1” (22.6 cm x 8.9 cm x 5.3 cm)
• Weight: 1.2 lbs

• SpO2 Modes
  • Averaging Mode: 2, 4, 8, 10, 12, 14, or 16 seconds
  • Sensitivity: Normal, APOD, and Maximum

• Alarms
  • Audible and visual alarms for high low saturation and pulse rate (SpO2 range 1-99%, pulse rate range 30-235 BPM)
• Display/Indications
  • Data display: %SpO2, pulse rate, alarm status, trends, status messages,
  • Display Color: Multi-color or monochrome blue
  • Type: TFT Color LCD
  • Pixels: 480 x 272 dots
  • Dot Pitch: 0.20 mm

MME is happy to help with any questions that you may have concerning our products. Our friendly and knowledgable customer service representatives are prepared  to guide you to what solution is right for you. To chat with a representative, click here(bottom right corner) or give us a call.