VX-2 Suction Unit with Flatback 2310V – SSCOR

SKU: N/A

Price range: $1,095.00 through $1,407.00

Standard Items Included with the VX-2 Suction Unit with Flatback:

DC Cable
AC/DC Converter
canister
2m patient tube
Hi-D® suction tip
A Quickstart Guide

Standard Items Included with the VX-2 Suction Unit with Charging Retention Bracket:

Charging/Retention Bracket
canister
2m patient tube
Hi-D® suction tip
A Quickstart Guide

NOTE: If you purchase a SSCOR VX-2 without the charging/retention bracket you cannot retrofit the device to accommodate the bracket at a later date.

If you are looking for a replacement battery for your suction unit, click here.

Please select an option from the dropdown below.

Want to learn more about this product? read the long description below.

Unit Options

Clear

Add to Quote

Accessories

If you are eligible for exemption from sales tax, please call or email us to place your order. All orders completed online will have applicable sales tax added.

Description

VX-2 Suction Unit with Flatback – FEATURES:

Fully adjustable regulator and gauge, enabling the user to adjust negative pressure to any point between <50mmHg to >525mmHg to perform a full range of suction procedures
Well protected yet easily accessible suction canister
IPX4 rated for resistance to ingress of fluids
Internal battery care system with external indicators
Ramps up incoming voltage to fully charge the battery
Provides a float charge when the battery is fully charged to avoid over-charging
Disconnects a depleted battery to avoid destructive deep discharge
LED indicators on the front panel show battery condition
Sealed lead acid battery makes replacing the battery affordable
The SSCOR VX-2 Flat Back is not recommended for hospital use

NOTE: If you purchase a SSCOR VX-2 without the charging/retention bracket you cannot retrofit the device to accommodate the bracket at a later date. VX-2 Suction Unit with Charging Retention Bracket – FEATURES:

- Compliant with SAE J3043 standards*
- When the device is on the charging/retention bracket the device runs using the vehicle battery and uses the vehicle battery to charge the internal sealed lead acid battery
- The device can be removed from the charging /retention bracket with one hand
- Fully adjustable regulator and gauge. Achieves negative pressure ratings to any point between <50mmHg to >525mmHg to perform a full range of suction procedures
- Well protected yet easily accessible suction canister
- Outward facing controls allow the operator to easily operate the device while it is on the charging/retention bracket.
- IPX4 rated for resistance to ingress of fluids
- Internal battery care system with external indicators
- Ramps up incoming voltage to optimally charge the battery
- Provides a float charge when the battery is fully charged to avoid over-charging
- Disconnects a depleted battery to avoid destructive deep discharge
- LED indicators on the front panel show battery condition
- Sealed Lead Acid Battery makes replacing the battery affordable. SSCOR will replace the battery free of charge if the battery does not perform to specifications within three years of purchase (SSCOR VX-2 with Charging/Retention Bracket only)
- The SSCOR VX-2 with Charging/Retention Bracket series is not recommended for hospital use

VX-2 Suction Unit with Flatback – SPECIFICATIONS:

Performance: Clinical Airflow Rating > 30lpm Variable Regulator and Gauge provides negative pressure readings between < 50mmHg to > 525mmHg.
Battery Run Time: 45 minutes (+/- 10%) when fully charged at full capacity
Battery Condition Indicators: LED indicators show battery level of charge
Internal Battery Charger: Charges the battery from AC or DC power source. Charges the internal sealed lead acid battery and disconnects a depleted battery to avoid a deep discharge. LED’s indicate charging status and remaining run time on internal battery.
Ingress Protection: IPX4
Conforms To: ETL listed, conforms to UL 60601-1, IEC 60601-1, EN 60601-1-2, CSA C22.2 No. 601.1 – M90, IPX4 per IEC 60529.

VX-2 Suction Unit with Charging Retention Bracket – SPECIFICATIONS:

Performance: Clinical Airflow Rating > 30lpm Variable Regulator and Gauge provides negative pressure readings between <50mmHg to >525mmHg
Battery Run Time: 45 minutes (+/- 10%) when fully charged at full capacity
Battery Condition Indicators: LED indicators show battery level of charge
Internal Battery Charger: Charges the battery from AC or DC power source. Charges the internal sealed lead acid battery and disconnects a depleted battery to avoid a deep discharge. LED’s indicate charging status and remaining run time on internal battery.
Charging/Retention Bracket: Secures the device to a force of 25G, EN 1789 compliant and SAE J3043 compliant.*
Ingress Protection: IPX4
Conforms To: ETL listed and conforms to ISO 10079-1, UL 60601-1, EN 60601-1-2, CSA C22.2 No. 601.1 – M90, IPX4 per IEC 60529, SAE J3043, EN 1789.

More Info

Weight	8.6 lbs
Dimensions	18 × 6.25 × 10 in
Condition	New Medical Equipment

Accessories

Master Medical Equipment is committed to providing as many accessory options for your units as possible. A full list of our online accessory listings for this unit can be found here. If you are unable to find the exact accessory you are looking for, please call one of our customer service representatives for information on the missing product or our recommended alternative.