Lifepak 15 AC Power Adapter 11140-000098 – Physio-Control

This Lifepak 15 AC Power accessory gives you more flexibility when moving your Lifepak 15 unit regardless if it is the hospital, EMS, or fire department. This accessory allows the unit to be charged and waiting while not in use and then immediately put to use whenever necessary. The AC Power can be attached the rear of the unit for easy access wherever the Lifepak 15 goes or it can be securely mounted to a crash cart so it is available when needed.

Technical Information:

FUNCTIONAL SPECIFICATIONS Dimensions: Approximately 63.5 x 76 x 317.5 mm (2.5 x 3.0 x 12.5 in) without cables attached. Approximately 63.5 x 76 x 457 mm (2.5 x 3.0 x 18 in) with cables attached. Weight: <1.36 kg (<3 lbs) Input Power requirements: 100-240 Vac 60/50 Hz, 1.4 A – 0.6 A Output DC Supply: 12 Vdc, 7A ENVIRONMENTAL SPECIFICATIONS Altitude, Operating: To 4,572 m (15,000 ft) Altitude, Non-operating: To 4,572 m (15,000 ft) Solid, Liquid Ingress: IP40 – Mounted in a vertical orientation with the input connector upward. IP44 – Mounted in a vertical orientation with the output connector upward OR mounted in a horizontal orientation. Humidity: 5% to 95% non-condensing Temperature, Operating: 0° to 45° C (32° to 113° F) Temperature, Storage: -40° to 70° C (-40° to 158° F) (Power Adapter must stabilize within operating temperature range before operating) All specifications are at 20° C unless otherwise stated  

Weight	8 lbs
Dimensions	10 × 101 × 10 in
Condition	New Medical Equipment, Recertified Medical Equipment